add top motor fixing

glissement.scad

@@ -16,7 +16,7 @@ $fn=200;
 difference(){	
 linear_extrude (height=10)
 
-	import (file="glissement.dxf", layer="profil-pour-3d", $fn=100);
+	import (file="all.dxf", layer="profil-pour-3d", $fn=100);
 	screws();
 }
 difference(){

top-axis.scad

@@ -0,0 +1,34 @@
+difference(){
+	union(){
+	linear_extrude(42.551)
+		polygon (points=[
+		[0,0],[11.75,0],[11.75,18.5],[21,18.5],[21,30.25],[-2.25,30.25],[-2.25,73.635],[-7.375,73.635],[-7.375,30.25],[-9.25,30.25],[-9.25,18.5],[0,18.5]
+	]);
+
+		translate([0,0,42.55])
+			linear_extrude(5)
+				polygon (points=[
+				[0,0],[11.75,0],,[21,18.5],[21,30.25],[-2.25,30.25],[-2.25,73.635],[0.75,73.635],[0.75,81.635],[-7.375,81.635],[-7.375,30.25],[-9.25,30.25],[-9.25,18.5]
+			]);
+	}
+	
+	union(){
+		translate([0,0,-0.01])
+			linear_extrude(42.550)
+			polygon (points=[
+		[5,5],[6.75,5],[6.75,23.5],[16,23.5],[16,25.25],[-4.25,25.25],[-4.25,23.5],[5,23.5]
+	]);
+
+		translate([-7.4,39.985,8.65]) cube([6,25,25]);
+
+		translate([-7.4,36.985,5.775]) rotate([0,90,0]) cylinder(h=6,r=1.5,$fn=100);
+		translate([-7.4,67.985,5.775]) rotate([0,90,0]) cylinder(h=6,r=1.5,$fn=100);
+translate([-7.4,36.985,36.775]) rotate([0,90,0]) cylinder(h=6,r=1.5,$fn=100);
+		translate([-7.4,67.985,36.775]) rotate([0,90,0]) cylinder(h=6,r=1.5,$fn=100);
+
+
+	translate([-2.8563,13.4208,42.54]) cylinder(h=6,r=2,$fn=100);
+	translate([14.6063,13.4208,42.54]) cylinder(h=6,r=2,$fn=100);
+	translate([-3.25,77.635,42.54]) cylinder(h=6,r=2,$fn=100);
+	}
+}