From 87d1359a0352fa1a15605d834f5d43ad5245fc14 Mon Sep 17 00:00:00 2001 From: Khajidu Date: Mon, 26 Oct 2015 20:30:43 +0100 Subject: [PATCH] =?UTF-8?q?fichier=20modifi=C3=A9?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- Firmware/Configuration.h | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/Firmware/Configuration.h b/Firmware/Configuration.h index 6c530e9..b37234b 100644 --- a/Firmware/Configuration.h +++ b/Firmware/Configuration.h @@ -18,7 +18,7 @@ // startup. Implementation of an idea by Prof Braino to inform user that any changes made to this // build by the user have been successfully uploaded into firmware. #define STRING_VERSION_CONFIG_H __DATE__ " " __TIME__ // build date and time -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "Jeanne D'Hack" // Who made the changes. // SERIAL_PORT selects which serial port should be used for communication with the host. // This allows the connection of wireless adapters (for instance) to non-default port pins. @@ -26,7 +26,7 @@ #define SERIAL_PORT 0 // This determines the communication speed of the printer -#define BAUDRATE 250000 +#define BAUDRATE 115200 // This enables the serial port associated to the Bluetooth interface //#define BTENABLED // Enable BT interface on AT90USB devices @@ -34,7 +34,7 @@ // The following define selects which electronics board you have. // Please choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_13_EFB + #define MOTHERBOARD BOARD_RAMPS_13_EFF #endif // Define this to set a custom name for your generic Mendel, @@ -70,16 +70,16 @@ // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them // Center-to-center distance of the holes in the diagonal push rods. -#define DELTA_DIAGONAL_ROD 250.0 // mm +#define DELTA_DIAGONAL_ROD 645.0 // mm // Horizontal offset from middle of printer to smooth rod center. -#define DELTA_SMOOTH_ROD_OFFSET 175.0 // mm +#define DELTA_SMOOTH_ROD_OFFSET 378.35 // mm // Horizontal offset of the universal joints on the end effector. -#define DELTA_EFFECTOR_OFFSET 33.0 // mm +#define DELTA_EFFECTOR_OFFSET 27.5 // mm // Horizontal offset of the universal joints on the carriages. -#define DELTA_CARRIAGE_OFFSET 18.0 // mm +#define DELTA_CARRIAGE_OFFSET 18.35 // mm // Effective horizontal distance bridged by diagonal push rods. #define DELTA_RADIUS (DELTA_SMOOTH_ROD_OFFSET-DELTA_EFFECTOR_OFFSET-DELTA_CARRIAGE_OFFSET) @@ -122,8 +122,8 @@ // 147 is Pt100 with 4k7 pullup // 110 is Pt100 with 1k pullup (non standard) -#define TEMP_SENSOR_0 -1 -#define TEMP_SENSOR_1 -1 +#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_1 1 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_BED 0