Merge branch 'master' of https://github.com/jeannedhack/reprapJeanneV2

DESSINS-DXF-OPENSCAD/piece_coin.scad

@@ -5,29 +5,25 @@ linear_extrude (height=3)
 difference(){
 	linear_extrude (height=38)
 			    import (file="piece_coin.dxf", layer="piececoin", $fn=200);
-	translate([-10, 22, 20.5])rotate ([0, 90, 0]) cylinder(r=1.5, h=60, $fn=50);
-	translate([30, -12, 20.5]) rotate ([0, 90, 30]) cylinder(r=1.5, h=60, $fn=50);
-	translate([-50, 18, 20.5]) rotate ([0, 90, -30]) cylinder(r=1.5, h=60, $fn=50);
-	translate([40, -32, 20.5]) rotate ([0, 90, 30]) cylinder(r=1.5, h=60, $fn=50);
-	translate([-60, -2, 20.5]) rotate ([0, 90, -30]) cylinder(r=1.5, h=60, $fn=50);
+	translate([-10, 22, 20.5])rotate ([0, 90, 0]) cylinder(r=2, h=60, $fn=50);
+	translate([30, -12, 20.5]) rotate ([0, 90, 30]) cylinder(r=2, h=60, $fn=50);
+	translate([-50, 18, 20.5]) rotate ([0, 90, -30]) cylinder(r=2, h=60, $fn=50);
+	translate([40, -32, 20.5]) rotate ([0, 90, 30]) cylinder(r=2, h=60, $fn=50);
+	translate([-60, -2, 20.5]) rotate ([0, 90, -30]) cylinder(r=2, h=60, $fn=50);
 
-	translate([15.1, -2, 20.5]) rotate ([270, 0,0 ]) cylinder(r=1.5, h=60, $fn=50);
+	translate([15.1, -2, 20.5]) rotate ([270, 0,0 ]) cylinder(r=2, h=60, $fn=50);
 	translate([15.1, 45, 20.5]) rotate ([270, 0,0 ]) cylinder(r=5, h=12, $fn=50);
-	translate([15.1, -26, 20.5]) rotate ([270, 0,0 ]) #cylinder(r=5, h=12, $fn=50);
-
-	translate([-38,19.6,25])
-		rotate ([90,0,240])
-			write("RepRap",h=6,t=4);
-	translate([-38,19.6,10])
-		rotate ([90,0,240])
-			write("Jeanne V2",h=6,t=2);
-	translate([86,-12,10])
-		rotate ([90,0,120])
-			write("Jeanne V2",h=6,t=2);
-	translate([86,-12,25])
-		rotate ([90,0,120])
-			write("RepRap",h=6,t=2);
+	translate([15.1, -27, 20.5]) rotate ([270, 0,0 ]) #cylinder(r=5, h=12, $fn=50);
 
+	translate([-6.8,44.9,25])
+		rotate ([90,0,215])
+			write("Jeanne",h=8,t=4);
+	translate([-6.8,44.9,12])
+		rotate ([90,0,215])
+			write("d'Hack",h=8,t=4);
+	translate([63,28,20])
+		rotate ([90,0,147])
+			write("Reprap",h=8,t=3);
 }