module verysmall(){
    rotate([90,0,180]) {
        translate([0,0,3])
        linear_extrude (height=30, $fn = 200)
        import (file="profils.dxf", layer="1", $fn=200); 
        
        linear_extrude (height=12, $fn = 200)
        import (file="profils.dxf", layer="0", $fn=200);
       
        translate([0,0,22])
        linear_extrude (height=12, $fn = 200)
        import (file="profils.dxf", layer="0", $fn=200);
     
    }
    
}

module small(){
        rotate([90,0,180]) {
        translate([0,0,3])
        linear_extrude (height=90, $fn = 200)
        import (file="profils.dxf", layer="1", $fn=200); 
        
        linear_extrude (height=12, $fn = 200)
        import (file="profils.dxf", layer="0", $fn=200);
       
        translate([0,0,22])
        linear_extrude (height=54, $fn = 200)
        import (file="profils.dxf", layer="0", $fn=200);
          
        translate([0,0,87])  
        linear_extrude (height=12, $fn = 200)
        import (file="profils.dxf", layer="0", $fn=200);
     
    }
}

module medium(){
       rotate([90,0,180]) {
        translate([0,0,3])
        linear_extrude (height=126, $fn = 200)
        import (file="profils.dxf", layer="1", $fn=200); 
        
        linear_extrude (height=12, $fn = 200)
        import (file="profils.dxf", layer="0", $fn=200);
       
        translate([0,0,22])
        linear_extrude (height=125-10-22, $fn = 200)
        import (file="profils.dxf", layer="0", $fn=200);
          
        translate([0,0,125])  
        linear_extrude (height=12, $fn = 200)
        import (file="profils.dxf", layer="0", $fn=200);
     
    }
}
module tall(){
        rotate([90,0,180]) {
        translate([0,0,3])
        linear_extrude (height=190, $fn = 200)
        import (file="profils.dxf", layer="1", $fn=200); 
        
        linear_extrude (height=12, $fn = 200)
        import (file="profils.dxf", layer="0", $fn=200);
       
        translate([0,0,22])
        linear_extrude (height=125-10-22, $fn = 200)
        import (file="profils.dxf", layer="0", $fn=200);
          
        translate([0,0,125])  
        linear_extrude (height=54, $fn = 200)
        import (file="profils.dxf", layer="0", $fn=200);
        
        translate([0,0,125+54+10])   
        linear_extrude (height=12, $fn = 200)
        import (file="profils.dxf", layer="0", $fn=200);
    }
}    
verysmall();
translate([20,0,0]) small();
translate([40,0,0]) medium(); 
translate([60,0,0]) tall();